Posts tagged Mede8er

Please find the link for the Mede8er MED500X v3.0.4 Firmware below.

http://www.mede8er.eu/download/Mede8er_FW_V3_0_4_140610.zip

USE THE EMERGENCY INSTALLATION PROCEDURE ONLY

Emergency Installation Procedure 

 - Download the latest Firmware from the Mede8er website;

 - Unzip the file i.e. install.img;

 - Copy this file to the root directory of a Flash Drive;

 - Plug the flash drive into the Mede8er;

 - Disconnect the power jack at the rear of the Mede8er then plug it back in;

 - Now press the on/off button (on Mede8er unit – not remote) – keep it pressed in for 10 seconds and then release;

 - After +- 15sec the LED on the front fascia of the Mede8er with flash red-blue;

 - You will get a progress bar on your TV display (some TV’s will not display this);

 - Wait until the Mede8er re boots itself +/- 90 sec;

 - Your Mede8er is now updated;

 - Re-boot once by pulling power and use as normal;

xxxx WARNING – DO NOT REMOVE POWER DURING THE UPDATE PROCESS xxxxx

NOTE: Once you update to V3.0.4 you cannot easily go back to older versions below V2.0.2 if you are using an internal Hard Drive that was formatted with the Mede8er due to a core code (SDK) upgrade. The update process will not damage your Hard Drive contents but the Hard Drive will then be shown as HDD1 instead of C. If you are not using an internal Hard Drive than you can roll back to a earlier version without any problems

 A) Do not update the Mede8er from the built-in update facility on the Setup screen;

 B) If you experience Samba network connection problems we suggest you perform a “Restore Default” in setup Menu and re-boot the Mede8er.

 C) After the Firmware is installed please re-boot the Mede8er – Unplug DC Jack and then re-plug;

 D) Do not do a Firmware Restore to update your Mede8er settings across versions – rather input settings manually;

 E) Important: Set your TV Resolution on the Main Setup Menu – Video System – for the first time after firmware update.

Mede8er Change Log v3.0.4 — 14 June 2010

 14 June 2010   RTD1073-128M-HMC-M03I-20100613-v7.0.7.r4282.QA20100402_SANJIA_ENGLISH_RC18

 1.   Fixed: Internet Radio. Station list limited by Shoutcast – Require to Use Search for more stations

      Do not use “System Restore” feature from a previous Mede8er firmware version

2.   Audio info and other info screens changed to larger info screen

3.   Russian text Media Library1 for “Hard drive” changed to  “Жесткий диск”.

4.   Improved navigation (smoother) on folders with images inside

5.   Fixed: “Pin Protection “”on”" setup Menu — then go to “”Home Page “”

      – select “”File Manager”"

      - enter “”File Manager”"

      – exit “”file manager”" with “”return key”"

      – press “”home key”" —> mede8er asks you the PSW

6.   Fixed: “Folder Protection” set to “on”   — Now must enter pin code to protect folder

7.   Fixed: “Folder Protection” “on” Setup menu.

      File manager copy to protected folder– Now does not ask for a pin code when selecting a protected folder

8.   Fixed: Music Player cut on some TV’s — Moved up 10 pix

9.   Fixed: Cyclic only in one direction –  zOOM about.jpg and now can cycle down or up

10. Updated Internet Time GMT names

     GMT + 12  New Zealand (Wellington dst)

     GMT + 6   Bangladesh

     GMT + 4   Dubai

     GMT + 3   Kuwait

     GMT +1    Netherlands

     GMT -1    Cape Verde (Praia)

     GMT -2    Brazil

     GMT -3    Argentina (Buenos Aires)

     GMT -4    Chile (Santiago dst)

     GMT -5    New York

     GMT -8    California

Known issues:

   o  6 June 2010  – Very high bit rate 29fps BDISO (+- 40GB+) have stuttering and audio loss  – Workaround –

      to revert to V2.0.2 or extract your BDISO files to BDMV Folder structure with a program such as ISOBUSTER.

      If you are using a program like AnyDVD we suggest you save as BDMV and not a ISO

    o Under certain filter conditions, time bar artwork punching through SETUP screen — Under investigation

        o Network (SMB) write not available to Non-Mede8er-formatted HDD (NTFS-only) — Under investigation

    o DVD resume on VIDEO_TS structure – Not working — SDK

    o Repeat A-B on BDISO — SDK

    o Restore from v1.x or v2.x backups — not restoring all fields correctly

    o On certain 16:9 DVD menus – selection highlight is misplaced — SDK issue

    o Simultaneous audio output via both HDMI and SPDIF — SDK restriction

    o resume dialogue DVDISO — SDK

    o resume play DVD VIDEO_TS — SDK